Create Giant Bubbles Up To 20 Feet Long

• Big Bubble Mix (1 Powder Pack and 1 Liquid Pouch)

• A 2-Gallon Bucket

• 4 Liters of Water at 95°F or 32°C

• Whisk

• Thermometer

Prepare the Water: Add 4 liters of water (95°F or 32°C) into a clean bucket. (Do Not mix with water above recommended temperature) Tap or Distilled water is fine.

1. Add the Powder: Empty the powder packet into the water.

2. Mix the Powder: Use a whisk to stir the solution until the powder is fully dissolved.

3. Add the Liquid: Pour the contents of the liquid pouch into the solution.

4. Final Mixing: Gently whisk the mixture to combine everything evenly.

5. Clean Up: After use, thoroughly clean your wands and ropes to prevent corrosion and damage.goes here

Click HERE to see Video for How To Mix Big Bubble Solution

Prepare the Wand & Rope: Attach the rope to the wands using clips provided.

1. Saturate the Rope: Dip the rope into the bubble solution until it’s fully soaked.

2. Lift and Drip: Keeping the wand tips together, lift the rope out of the solution and let any excess drip off.

3. Positioning: Step aside and hold the wands up, slowly opening the tips of the wands.

4. Use the Wind: Make sure the wind is at your back. When you open the wands, the wind will carry the air through the rope, forming bubbles.

5. No Wind? No Problem: If there’s no wind, extend one arm out, pull the other arm in to tighten the rope, and gently turn from side to side, scooping the air to create bubbles.

6. Walking Backwards: Alternatively, you can hold the wands high (be mindful of your surroundings) and begin walking backwards. This will generate airflow to fill the bubbles.

7. Large Loop Rope Tips: When using the large loop rope, remember to open and close the wands slowly to create the perfect bubble.

8. Repeat: Continue to dip, lift, and create bubbles until the solution is used up.

Click the How to Make Bubbles Video for a full demonstration.

• Unused Solution: Store any unused bubble solution in a cold, dark place to extend its shelf life.

• Reusing Mixed Solution: The solution can be reused cold; however, for optimal results, warm the solution to room temperature or slightly warmer. Placing a hot water bottle under the bucket is a good way to gently warm the solution. This will increase the elasticity of the solution, ensuring bigger and longer-lasting bubbles.

• Disposing Unused Solution: Mixed bubble solution has a life expectancy of 3-4 weeks, depending on how it’s stored. Dispose of any old or rancid solution by flushing it down the toilet or pouring it down the sink drain.

To ensure the safe and effective use of your bubble solution, please follow these important guidelines:

• Keep Out of Reach of Children and Pets: For safety, store the bubble solution kit in a place that’s inaccessible to children and pets to prevent accidental ingestion or misuse.

• Do Not Consume: The bubble solution is not intended for consumption. If ingested, drink a glass of water to dilute the solution. Seek medical help if necessary.

• Eye Contact: In case of accidental contact with eyes, rinse immediately with clean water for at least 15 minutes. If irritation persists, consult a healthcare professional.

Usage Precautions

For the best bubble-making experience, please follow these tips:

• Avoid Slippery Surfaces: Do not use the bubble solution on hard, flat surfaces like concrete or pavement, as this can cause slips and falls. Grass or gravel surfaces are ideal.

• Use Outdoors Only: This bubble solution is intended for outdoor use. Do not use it indoors to avoid damage to surfaces and to ensure optimal bubble creation.

• Not for Toys or Machines: Avoid using the solution in bubble machines or toys, as it may cause damage.

• Best Conditions for Bubble-Making Shaded Areas: Direct sunlight can affect bubble performance. For best results, use the bubble solution on overcast or cloudy days, or in shaded areas to prevent the solution from drying too quickly.

• Wind Conditions: Windy conditions can cause bubbles to pop prematurely. Avoid using the solution when wind speeds exceed 12 km/h (7.5 mph). Light winds are best for producing larger, longer-lasting bubbles.

• Water Quality and Temperature Using Distilled Water: For immediate use, mix the solution with distilled water.

• Using Tap Water: If mixing with tap water, allow the solution to sit for 12–24 hours to achieve optimal performance (though it can be used immediately).

• Mixing Temperature: Use water at around 35°C (95°F) when mixing the solution. Avoid mixing with water that exceeds 36.5°C (98°F), as high temperatures may affect the solution’s performance.

Post-Use Care

After using the solution, it’s important to care for your bubble-making tools:

• Wash and Dry: Thoroughly rinse and dry the wands and ropes to prevent corrosion or damage.

Storing and Disposing of Bubble Solution

• Storing Unused Solution: Keep unused solution in a cool, dark place (like a refrigerator) to extend its shelf life. It can last for up to 3-4 weeks, depending on storage conditions.

• Reusing Solution: The solution can be reused when cold, but for optimal performance, warm it to room temperature or slightly warmer. A great way to gently warm the solution is by placing a hot water bottle under the bucket. This will help increase the elasticity of the solution, making for bigger and longer-lasting bubbles.

• Disposal of Expired Solution: The bubble solution has a shelf life of 3-4 weeks. If the solution has expired, dispose of it safely by pouring it down the toilet or sink drain.

Summary:

• Safety First: Keep the kit out of reach of children and pets, and avoid ingestion or eye contact.

• Best Conditions: Use the solution in shaded areas, with light winds and distilled or rested tap water.

• Storage: Keep unused solution in a cool, dark place and use it within 3-4 weeks.

• Reusing Solution: For best results, warm the solution to room temperature.

• Disposal: Dispose of expired solution by flushing it down the sink or toilet.ription